Quartz Tungsten / Halogen Elements
Quartz Tungsten / Halogen Elements
Short wave quartz halogen and medium wave quartz tungsten gas emitters are high-intensity infrared heaters. They provide the high temperatures necessary for fast-moving processes. These include paint-curing in the automotive industry, drying or curing adhesives and plastics processing. These fast-response, powerful elements heat up in seconds, converting input power into efficient radiant heat immediately. Their precise output control makes them ideal for forming and curing plastics and for use in directional heating systems with short cycle times.
Normally used for industrial processes that require rapid heating and/or zone-controlled heating. Quartz elements heat up in seconds, which is much faster than ceramic heaters. This makes them particularly efficient and effective for manufacturing processes such as plastic thermoforming and curing, as well as for heater systems with long off cycles.
(QHL) Quartz Halogen - Long
(QHM) Quartz Halogen - Medium
(QHM) Quartz Halogen - Medium
These heaters are filled with halogen gas to allow the supported tungsten filament to reach temperatures as high as 2250°C (4082°F).
With peak wavelength emissions of approximately 1 micron, they are extremely penetrative and allow rapid on/off cycles.
(QHM) Quartz Halogen - Medium
(QHM) Quartz Halogen - Medium
(QHM) Quartz Halogen - Medium
These short wave emitters are filled with halogen gas to allow the supported tungsten filament to reach temperatures as high as 2410°C (4370°F).
With peak wavelength emissions of approximately 1 micron, they are extremely penetrative and allow rapid on/off cycles.
(QHS) Quartz Halogen - Short
(QHM) Quartz Halogen - Medium
(QHS) Quartz Halogen - Short
These short wave emitters are filled with halogen gas to allow the supported tungsten filament to reach temperatures as high as 2410°C (4370°F).
With peak wavelength emissions of approximately 1 micron, they are extremely penetrative and allow rapid on/off cycles.
(QTL) Quartz Tungsten - Long
(QTM) Quartz Tungsten - Medium
(QHS) Quartz Halogen - Short
The tungsten filament used in these fast medium wave heaters is the porcupine or star type coil, which can be operated at temperatures up to 1500°C (2732°F), with peak wavelength emissions of approximately 1.6 microns. It reaches top temperatures within seconds.
(QTM) Quartz Tungsten - Medium
(QTM) Quartz Tungsten - Medium
(QTM) Quartz Tungsten - Medium
The tungsten filament used in these fast medium wave heaters is the porcupine or star type coil, which can be operated at temperatures up to 1450°C (2642°F), with peak wavelength emissions of approximately 1.6 microns. It reaches top temperatures within seconds.
(QTS) Quartz Tungsten - Short
(QTM) Quartz Tungsten - Medium
(QTM) Quartz Tungsten - Medium
The tungsten filament used in these fast medium wave heaters is the porcupine or star type coil, which can be operated at temperatures up to 1450°C (2642°F), with peak wavelength emissions of approximately 1.6 microns. It reaches top temperatures within seconds.
R7 - Ceramic Holder
R7 - Ceramic Holder
R7 - Ceramic Holder
Designed to support Ceramicx standard quartz tungsten tubes and quartz halogen tubes. R7s holders delivers exceptional thermal resistance, secure electrical contact, and long-term operational reliability. Compatible with a wide range of linear tubes.